Products
All Products
View:
Use and Type
Axial flow fans are widely used for ventilation in general factories, warehouses, offices, and residences or to increase heating and heat dissipation. If the casing is removed, it can be used as a free fan, or it can be installed in series at intervals in a long exhaust duct to increase the wind pressure in the duct.
There are 46 varieties of this fan, among which there are nine machine numbers with 3 blades, 6 blades, 8 blades and 9 blades. According to the diameter of the impel...
Describe
The 4-73 type boiler ventilation and induced draft fan is mainly suitable for the ventilation and induced draft fan system of 2~670t/h steam boilers in thermal power plants. In the absence of other special requirements, 4-73 can also be used for mine ventilation and general ventilation.
The medium conveyed by the ventilator is air, and the maximum temperature shall not exceed 80°C; the medium conveyed by the induced draft fan is flue gas, and the maximum temperature shall not exceed ...
Mine Fan Brick Factory Fan 5-47/5-48
Uses and Features
Y5-47, 5-48, II-type boiler centrifugal fans are suitable for industrial boilers that burn various coal qualities and are equipped with smoke and dust removal devices of 0.2t/h~20t/h. Both can be used, but the maximum temperature shall not exceed 250°C.
At present, there are many types of industrial boiler series, the quality of the coal used varies widely, the supporting dust collectors and pipe resistances are different, and the required air volume and air pressure of the ...
Describe
The 4-73 type boiler ventilation and induced draft fan is mainly suitable for the ventilation and induced draft fan system of 2~670t/h steam boilers in thermal power plants. In the absence of other special requirements, 4-73 can also be used for mine ventilation and general ventilation.
The medium conveyed by the ventilator is air, and the maximum temperature shall not exceed 80°C; the medium conveyed by the induced draft fan is flue gas, and the maximum temperature shall not exceed ...
Industrial Boiler General Fan 9-38
Describe
The 9-38 series boiler centrifugal fan is to make the fan work in the high-efficiency zone when the industrial boiler is operating under variable conditions, so as to achieve the purpose of energy saving. The high-efficiency and energy-saving products promoted by the State Economic Commission and the Ministry of Machinery Industry have the advantages of high efficiency, low noise, and wide high-efficiency zone of performance curves.
This fan is suitable for 0.5~35t/h industrial boile...
Metallurgical fan 5-47 5-48(Pharmacy is also available)
Uses and Features
Y5-47, 5-48, II-type boiler centrifugal fans are suitable for industrial boilers that burn various coal qualities and are equipped with smoke and dust removal devices of 0.2t/h~20t/h. Both can be used, but the maximum temperature shall not exceed 250°C.
At present, there are many types of industrial boiler series, the quality of the coal used varies widely, the supporting dust collectors and pipe resistances are different, and the required air volume and air pressure of the ...
Industrial Boiler General Fan 7-41
Describe
The main features of the 7-41 type industrial boiler ventilation fan are: high fan efficiency, high total pressure, low noise, flat performance curve, wide economic use area, and the use of backward plate-shaped blades. The internal pressure efficiency is 86.5%
Noise index (ratio A sound level) LS=11.5 decibels, these two indexes are the same as those of various industrial boilers currently available in China
Compared with other types of fans, they are at the best level. If the fan r...
Thermal Power Generation Fan 4-68
Describe
The 4-68 boiler centrifugal fan is a series of products jointly designed by the fan industry in 1982. It is mainly suitable for the ventilation and induction system of steam boilers with an evaporation capacity below 230t/h in thermal power plants. When the performance is similar and there is no special requirement, 4-68 can also be used for mine ventilation and general ventilation. Both types of fans have the advantages of high efficiency, low noise and high strength.
The medium con...
Thermal Power Generation Fan 5-51/6-51
Describe
5-51, 6-51 type boiler supply and induction fans are suitable for the supply and induction fan system of 2t/h~670t/h steam boilers in thermal power plants, and can also meet the performance parameters of fluidized bed furnace high pressure head. This series of fans It can also be used for dust removal, mine ventilation and general ventilation systems.
The medium conveyed by the blower is air, and the medium conveyed by the induced draft fan is flue gas or gas containing impurity par...
Describe
According to the actual situation of different needs in chemical industry, metallurgy, steel and other industries, we independently developed high axial flow fans.while reducing the,The electricity consumption of the enterprise, but also produced a high economic benefit.
Features
1: It adopts the axial flow structure, which has a suitable specific speed value for the air volume and air pressure required by various enterprises, and the size of the fan is small.
2: The impeller adopts...
Thermal Power Generation Fan 4-68
Manufacturer : Changhao Company
Describe
The 4-68 boiler centrifugal fan is a series of products jointly designed by the fan industry in 1982. It is mainly suitable for the ventilation and induction system of steam boilers with an evaporation capacity below 230t/h in thermal power plants. When the performance is similar and there is no special requirement, 4-68 can also be used for mine ventilation and general ventilation. Both types of fans have the advantages of high efficiency, low noise and high strength.
The medium con...
Describe
9-19, 9-26 high-pressure centrifugal fans are generally used for forging furnaces and high-pressure forced ventilation, and can also be widely used for conveying materials, air and non-corrosive, non-spontaneous combustion, non-explosive, non-volatile, non-sticky gas of matter. The temperature of the medium generally does not exceed 50°C (the maximum does not exceed 80°C), and the content of dust and hard particles in the medium does not exceed 150mg/m3.
Type and structure
The...
Industrial Boiler General Fan 9-35
Describe
At present, there are many boiler series, and the coal quality varies greatly. After installing dust removal equipment and waste heat utilization equipment, the lack of suction will affect the normal operation. Boiler combustion and normal operation, so the design and manufacture of 9-35 boiler centrifugal fans whose air volume and air pressure match the boiler are available for users to choose. Others with similar performance can also be used.
Type
The fan can be made into two forms...
Metallurgical fan 5-47 MQS5-54
Describe
MOS5-54 blower for conveying broken materials is mainly used in wood processing enterprises such as wood-based panel factories, timber factories, furniture factories and other similar units.It can send loose materials such as wood or bamboo from one place to another by virtue of the wind.
The fan adopts foreign advanced technology, and its biggest advantage is that large wood chips and larger wood blocks can pass through the fan without hindrance, which overcomes the jamming and blo...
Describe
The 8-09 high-pressure centrifugal fan is a special fan matched with the melting rate of 1, 2, 3, 5, 7t/h, iron furnace, and can also be used as a blower for various melting furnaces, forging furnaces, air delivery and non-toxic Gases that are corrosive, non-spontaneous, and non-viscous can also be used with similar properties, but the temperature of the conveying medium should not exceed 80°C, and the dust and hard particles contained in the medium should not exceed 150 mg/m.
Type a...
Describe
The 9-12 high-pressure centrifugal fan is a special fan matched with the melting rate of 1, 2, 3, 5, 7t/h, iron furnace, and can also be used as a blower for various melting furnaces, forging furnaces, air delivery and non-toxic Gases that are corrosive, non-spontaneous, and non-viscous can also be used with similar properties, but the temperature of the conveying medium should not exceed 80°C, and the dust and hard particles contained in the medium should not exceed 150 mg/m.
Type a...
Home > Products